Features:
To meet the market requirement,we have applied our years of experience and adopted techniques and concepts from Europe and America to improve the NSK-294.We finally developed the NSK-294-2C two-color rotary type automatic soles jointing & ejecting machine.This machine has photoelectric digit control system which has three patents from the national Bureau of Standard,Taiwan,The system is not only easy to control,but also durable ,thus improving production efficiency
The special screw rod makes it easy to feed material evenly and speedily.It is also easy to change the color ofmaterials.The computer synchronizes operation thus the machine works precisely.The joint of soles is excellent-no separation ,no permeation of colors.High quality products increases ones market competitiveness.P.V.C. canvas,P.U.,and leather are suitable for this machine.
Features:
- It completes two-color shoes making process directly which is instead of the former complicated procedure of lasting ,gluing and sole attaching.
- It is suitable for P.V.C. foaming, T.P.R. powder P.U. & N.B.R.
- Photoelectric digit control system with 3 patents divides quantity of materials into sixteen steps to control ejection quantity respectively and precisely.
- The power of oil pressure open-mould and clamp-mould is great. And there is no burr.
- The unique design of screw makes it easy to change color.
- The special oil pressure loop circuit and smooth movement of disk make locating precise and position will never move.
- As oil passage and electric circuit are separated. It's easy to maintain.
- Powerful pressure makes two colors melded. There is no color permeance and base color will keep well.
- The machine is controlled by computer synchronous system which makes movement precise and no error.
- The machine is suitable for making sports shoes.
- Last pulling and Californian type can be produced at the same time.
- Single-color and two-color production can be done at the same time.
- Material passage can be automatically clamping to save labor cost.
Specification:
| ITEM |
UNIT |
SIXTEEN MOLDS |
| Screw rod diameter |
mm |
72 x 2 |
| Ejective capacity |
cm 3/shot |
680 x 2 |
| Screw revolution |
r.p.m. |
60 -110 |
| Stroke of mold clamping |
mm |
100 |
| Size of mold available |
mm |
180 x 380 |
| Motor of oil-pressure pump |
kw/pole |
4P x 7.5HP /6P x 20HP x2 |
| Oil-pressure motor for screw rod driving |
cc/rev |
230 |
| Electric heating capacity |
kw |
16 |
| Acting oil capacity |
L |
280/150 |
| Machine weight |
ton |
13.2 +2.8 |
| Machine volume |
mm |
8600 x 3050 x 2500 |
| Gross weight |
ton |
16.7 + 3.8 |
| Packing dimension |
mm |
6520 x 3310 x 2960 &
3730 x 1850 x 2310 |
|
